•
Do not use this appliance near
the water contained in bathtubs,
washbasins or other containers.
• When used in a bathroom, disconnect
after use. The proximity of water
represents a danger even when the
appliance is off.
• To ensure a complementary protection
it is advisable to install in the electrical
circuit of the bathroom a residual
differential current device (DDR) of
differential current of assigned capacity
that does not exceed 30 mA. Ask your
supplier for advice.
INSTRUCTIONS OF USE
• Connect the micro-USB socket of the cable (6) to the charging
socket of the apparatus (5). Connect the USB socket (6) to a USB
power adapter. Keep plugged in about 2.5 hours to get a full
charge of the appliance, the charge indicator shall be flashing
red during the process and shall change to blue when the
appliance is already loaded.
• Place by pressing, the accessory you are going to use, in the
spindle (1).
• Press the ON switch for several seconds to turn on the device.
Press the switch (4) once, if you wish to change the direction of
rotation again, you must press the ON switch (4) again.
• To turn it off, press and hold the power switch (4).
• You can choose the speed by pressing the speed regulators +/-
(2) in one or other position. The unit has 7 speed levels.
Excessive sharpening can damage the surface of
the nails or the skin. Danger of injury!
Notes
• Cutting and polishing the nails with the help of this appliance
helps to make them more consistent. When using regularly,
broken nails can be significantly reduced.
• The nails can acquire a brown-and yellowish tone. The reasons
are from shoes too narrow through external pressures to a
fungal infection. Do not try to eliminate this color tone by over-
filing; the surface may become too thin and the nail may break.
13
JBSM1200
