Dyson absolute DC17 Manual De Instrucciones página 2

Ocultar thumbs Ver también para absolute DC17:
Idiomas disponibles

Idiomas disponibles

14953_DCI7
US
OP
MAN.qxd
pl
6/22/06
10:14
AM
Page
4
z
So
k-D
O9
O
Zz
w
O
c/) _-
wE
z
k-w
w
z
w
z
_<
._J
a_
<
_9
"i-
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS
BEFORE USING
THIS VACUUM
CLEANER
When using an electrical
appliance,
basic precautions
should always be followed,
including
the following:
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR INJURY:
1
Do not leave appliance
when plugged
in. Unplug
from electrical
outlet when not
in use and before servicing.
2
Do not use outdoors
or on wet surfaces or to vacuum
water or other liquids-
electric shock and personal
injury could occur.
3
Do not allow to be used as a toy. Close attention
is necessary when used by
or near children.
4
Do not allow use by anyone
unable to operate
the vacuum
properly.
5
Use only as described
in this manual.
Use only with Dyson recommended
attachments,
accessories,
and replacement
parts.
6
Check to ensure your electricity
supply corresponds
to that shown on the rating
plate, which can be found
behind the bin. The machine
must only be used as
rated.
7
If the appliance
is not functioning
properly,
has been dropped,
damaged,
left
outdoors,
or immersed
in liquid,
contact the Dyson Helpline
at 1-866-693-9766.
8
Do not use with a damaged
cord or plug. Do not pull or carry by the cord; do not
use the cord as a handle;
do not close a door on the cord or pull the cord around
sharp edges or corners.
Do not run the machine
over the cord. Keep the cord
away from heated surfaces and open flames.
9
Do not unplug
by pulling
on the cord. To unplug,
grasp the plug, not the cord.
10 Do not handle the plug or appliance
with wet hands.
11 Do not use the appliance
without
the clear bin and filters in place.
12 Do not put any object into openings
in the machine.
Do not use with any opening
blocked;
keep free of dust, lint, hair and anything
that may reduce air flow.
13 Keep hair, loose clothing,
fingers,
and all parts of body away from openings
in the machine
and moving
parts, such as the brushbar.
14 Do not use the machine
to pick up sharp hard objects, small toys, pins, paper
clips etc., because they may damage
the machine.
15 The use of an extension
cord is not recommended.
16 Store the machine
indoors.
Put the vacuum
cleaner
away after use with the cord
coiled safely, to prevent tripping
accidents.
17 Turn off all controls
before unplugging.
18 Take extra care when cleaning
on stairs; always work with the machine
at the
bottom
of the stairs. Keep vacuum
on the floor. Do not put the machine
on chairs,
tables etc.
19 Do not pick up anything
that is burning
or smoking,
such as cigarettes,
matches or hot ashes.
20
21
Do not use to pick up flammable
or combustible
liquids,
such as gasoline,
or use in areas where they may be present.
When vacuuming,
certain carpets may generate
small static charges
in the clear
bin or wand. These are not associated
with the electricity
supply. To minimize
any
effect from this, do not put your hand or insert any object into the clear bin unless
you have first emptied
it and rinsed it out with cold water.
22
Do not carry out any maintenance
or repair work other than that shown in this
manual
or advised by the Dyson Helpline.
23 Consult
your flooring
manufacturer's
recommended
instructions
before vacuuming
and caring for your flooring,
rugs, and carpets.
Some carpets will fuzz if a rotating
brushbar
is used when vacuuming.
If this happens,
we recommend
vacuuming
in
bare floors mode and consulting
with your flooring
manufacturer.
Polarization instructions
To reduce the risk of electric shock, this appliance
has a polarized
plug (one blade
is wider than the other). This plug will fit in a polarized
outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified
electrician
to install the proper outlet.
Do not change the plug in any way.
Assembly
Ensure hose is straight when inserting wand.
Using your DC1 7
Caution
This machine
is intended
for domestic
use only. Fine dust such as plaster dust or
flour should only be vacuumed
in very small amounts.
Do not press the cyclone release button while carrying
the machine
or it could fall
and cause injury.
Ensure the cyclone is secured to the machine.
Do not shake the machine while carrying
or it could fall and cause injury.
Use machine
in bare floors mode for bare or delicate flooring,
rugs, and carpets.
Consult
your flooring
manufacturer's
recommended
instructions
before vacuuming
and caring for your flooring,
rugs, and carpets.
Some carpets will fuzz if a rotating
brushbar
is used when vacuuming.
If this happens,
we recommend
vacuuming
in
bare floors mode and consulting
with your flooring
manufacturer.
Fingertip controls
The brushbar
will re-set to "ON"
each time you start the machine
and put it in the
cleaning
position.
To turn the brushbar
off, put the machine
in the cleaning
position
and press the
brushbar
on/off
button.
The brushbar
will automatically
stop if it becomes
obstructed.
If the brushbar
stops during
use, please refer to the blockages
section.
Using tools
Ensure machine
is in upright
position
before using tools.
To protect your floors, the brushbar
will not rotate when the machine
is in an
upright
position.
Ensure hair and loose clothing
are kept clear of wand
cap when machine
is
switched
on.
Ensure wand
cap is closed,
unless using with tools.
Powerful suction can cause the hose to "pull back' - please take care when
cleaning
stairs.
To avoid personal
injury
and to prevent the machine
from falling
when cleaning
stairs, always place it at the bottom
of the stairs.
Do not use your vacuum
cleaner outdoors
or on wet surfaces.
Vacuum
may be
used inside a garage
only with the Model
08909
Dyson Car Cleaning
Kit
accessories.
If used in a garage,
care should
be taken to wipe the soleplate
and
wheels with a dry cloth after vacuuming
to clean off any sand, dirt, or pebbles
which could damage
delicate floors.
.--I
z
>
r-
>
z
o}
m
z
.-I
m
z
u
m
u
m
0
I
0
c
I
0
r-
u
c
m
©
z
>.
<
m
--t
-r
m
m
C
0
--t
0
Z
loading