Richell 94928 Manual De Instrucciones

Manuel d' instruction 取扱 説明 書 使用 説明 書 취 급 설명서
Thank you for choosing Richell's Product. Please read this instruction manual carefully before using this product, and keep for
future reference. If you give this product to someone else, please also give this instruction manual to the new owner. Please
note some parts of the figures shown below may be slightly different from the actual product, for your better understanding of
the structure and proper use.
1. Proper Usage
Designed to extend Richell Gates 94928, 94929, 94930 and 94931 to fit openings up to 40.4" wide.
Before assembling this product, make sure all the following parts are included:
Option Frame (1) Joint (2)
En =
=
3. Installation
Richell Gates 94928, 94929, 94930 and 94931 are assembled using an Option Frame Set to fit openings from 36.4" to 40.4" wide.
Make sure to keep unused parts out of reach of children.
eOnly one Option Frame can be attached to each side.
eUse with openings within 40.4" wide.
eDo not use this product for 94932, 94933, 94934 and 94935.
eRichell Gates 94928, 94929, 94930 and 94931 include:
Adjuster Knob -
Hexagon Nut a Option Frame Place Knob in the correct Adjuster Bolt
Joint
(2)
direction as shown below.
Hexagon
Option Frame (1) Nut
Insert
Option Frame
Place Knob in the correct
Figure 1
View of Knob facing
correct direction.
direction as shown below.
The side on Joint is longer
than other.
Assemble hardware in the following order as shown:
insert the Joint into Option Frame in the order of Hexagon
Nut, Side Frame, Hexagon Nut, Adjuster Knob, Option
Frame.
(Then, insert Joint into the hole on the side of Main Unit on
both sides (see left figure).
XTo Install Richell's Gate with Option Frame in a doorway or
hallway, follow the instruction manual of Richell Gates
Insert 94928, 94929, 94930 and 94931.
4. Instruction for Proper Use
After assembly, follow the instruction manual of Richell Gates 94928, 94929, 94930 and 94931 for proper use.
5. Specifications
UPC/JAN 803840 94354-0 / 4973655 50571-7 803840 94356-4 / 4973655 50581-6
803840 94355-7 / 4973655 50573-1 803840 94357-1 / 4973655 50583-0
Dimensions 3.9"W x 0.8"D x 26.4"H 3.9"W x 0.8"D x 34.3"H
Materials Frame : Joint : Steel (Polyester coating)
ePlease note that product specifications and design may change without prior notice for the purpose of quality improvement.
elf you find something wrong with this product, please let us know. Thank you!
For USA Customers
Designed by:
Richell Corporation, Japan
Distributed by:
Richell USA, Inc.
Grand Prairie, Texas 75050
Phone (972) 641-9795 Fax (972) 641-8495
Visit us at www.richellusa.com
MADE IN VIETNAM