Idiomas disponibles
Idiomas disponibles
EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
This tool is designed to drive in screws and tighten nuts
quickly, especially when working with long fasteners
and tough materials.
It is equipped with a LED working light to improve ac-
curacy while working, a 1/4'' hex quick change toolless
chuck type for a fast bit's insertion and removal, and a
trigger switch which can be locked to prevent an acci-
dental starting of the tool.
SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all ins-
tructions. Failure to follow the warnings and instruc-
tions listed below may result in electric shock, fire and/
or serious injury.
• Check for breakage of parts, damage to switches
and any other conditions that may affect its ope-
ration.
• Before connecting accessories to the tool, discon-
nect battery pack or place the switch in the locked
position.
• Keep the tool and its handle dry, clean and free
from oil and grease.
• Always wear eye and respiratory protection.
• Hold tool by insulated grip surface when perfor-
ming an operation where the tool may come in
contact with the hidden wiring. Contact with a
"live" wire will make exposed metal parts of the
tool "live" and shock the operator.
• When installing a screw bit, make sure the bit is
inserted deep enough.
• When removing the screw bit from the tool, avoid
contacting with skin and use proper protective glo-
ves.
OPERATION
Installing screwdriver bits
Pull the bit holder forward and insert the screwdriver
bit into it.
Release the bit holder.
Slowly pull the screwdriver bit forward until the bit is
firmly fixed to the detent pin inside the bit holder.
TECHNICAL SPECIFICATIONS
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20V-DC
No-load Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-2800 RPM
Max. Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200Nm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,18kg
Chuck type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4'' Hex Quick Change
Turning on/off
To turn on the tool, slowly depress the trigger switch.
To increase speed, increase the pressure on the switch
trigger.
To turn off, fully release the trigger.
Rotation selection
Press the button to select the rotation direction:
Note: To lock the tool, put the selector at the center
position.
MANTENANCE
Always be sure that the tool is switched off and the bat-
tery pack is removed from the tool before attempting to
perform inspection or maintenance.
Regularly clean the tool's air vents with compressed
dry air. Do not attempt to clean by inserting pointed
objects through openings.
PARTS LIST
NUM.
1
Bit holder
2
Trigger Switch
3
Forward/Reverse Selector
4
Battery release Button
5
Belt hook
6
Battery Pack
· 4 ·
DESCRIPTION
REF. 60005
