Fiu. 1
PRODUCT FEATURES
Fig 1
Pistol position
1. CornerIDetail Brush
2. Quick & Easy Tool Release
3. Twist 'n Scrub Handle
Release
4.
OnIOff Button
5.
Rechargeable Battery
Release Latch
--.
-.
-
=
. = = ? = +
.
-
.=.
+=Jrgq)
-
Wand position
Fia. 2
CLEANING HEADS
CornerIDetail Brush attaches
directly to the Scrub Devil.
L
Scouring pad and Scrub Brush
attach to Tool Adaptor and then
directly to the Scrub Devil.
Fig 2
a. CornerIDetail Brush
b. Scouring Pad
c. Scrub Brush
d. Tool Adaptor
*
Scouring Pad and Scrub Brush shown as attached
to
Tool Adaptor
d.
Rotate
IMPORTANT:
Do not use abrasive solvents or cleansers that may damage fiberglass tubs, showers, soft metals, or plastic tile (see chart). Choose
detergent or household cleaners made for bathroom cleaning. Always read and follow the manufacturer's instructions on any cleaner.
Select Wand Position
Your Scrub Devil has been designed to be used as a pistol (Diagram 1) or a wand (Diagram 2).
a. Pistol Position: Push Twist 'n Scrub Handle Release button forward and rotate handle 90" or 114 turn clockwise and lock in place (Diagram 3).
b. Wand Position: Push Twist 'n Scrub Handle Release button forward and rotate handle counterclockwise and lock in place (Diagram 3).
Choosing Accessory & Suggested Uses
a. CornerIDetail brush: Use to get into corners and around faucets, shower heads and other tight areas.
b. Scouring pad and Scrub Brush: Use to clean large areas such as tile walls, tub, and sinks.
(See page 5, Surface Cleaning Guide, for additional cleaning tips).
Attaching Accessory
1. To attach a cleaning accessory, line up the slotted shaft of the attachment over the slotted hole in the Scrub Devil and push it on (Diagram 4).
a.
Corner detail tool: Attaches directly to Scrub Devil.
b.
Scouring Pad: Attaches to Tool Adaptor with velcro.
c.
Scrub Brush: Attaches to Tool Adaptor with velcro and plastic tabs.
2. To remove an accessory, simply push the Quick & Easy Tool Release Collar toward accessory. Accessory comes off. (Diagram 4).
4