Craftsman 917.388022 Manual Del Usuario página 16

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

CYLINDER
1. Remove
spark plug.
2.
Pour one ounce (29 ml) of oil through
spark plug hole into cylinder.
3.
Pull starter handle slowly a few times
to distribute oil.
4.
Replace
with new spark plug.
OTHER
• Do not store gasoline from one season
to another.
• Replace
your gasoline can if your can
starts to rust. Rust and/or dirt in your
gasoline
will cause problems.
• If possible, store your unit indoors
and
cover it to give protection from dust and
dirt.
• Cover your unit with a suitable protec-
tive cover that does not retain moisture.
Do not use plastic.
Plastic cannot
breathe, which allows condensation
to
form and will cause your unit to rust.
IMPORTANT:
Never cover mower while
engine
and exhaust
areas are still warm.
_CAUTION:
Never store the lawn
mower with gasoline in the tank inside a
building
where fumes
may reach an open
flame or spark.
Allow the engine to cool
before storing in any enclosure.
PROBLEM
)oes not start
TROUBLESHOOTING
CHART
CAUSE
1.
Dirty airfllter.
2.
Out of fuel.
3.
Stale fuel.
4. Water in fuel.
5.
Spark plug wire is
disconnected.
6.
Bad spark plug.
7.
Loose
blade or broken
blade adapter.
8.
Control
bar in released
position.
9.
Control
bar defective.
CORRECTION
1. Clean/replace
air filter.
2.
Fill fuel tank.
3.
Drain tank and refill with
fresh clean fuel.
4.
Drain fuel tank and
carburetor and refill tank
with fresh gasoline.
5. Connect wire to plug.
6.
Replace
spark plug.
7. Tighten
blade bolt or
replace
blade adapter.
8.
Depress
control
bar to
handle.
9.
Replace
control
bar.
16
Tabla de contenido
loading

Tabla de contenido