Before First Use; Operation Instruction; Using Your Steam Iron; Filling With Water - Westinghouse WGSISL105 Instrucciones

BEFORE FIRST USE

There may be a release of smoke, a harmless odor and a light spray of particles when
you use your appliance for the first time. This has no effect on the use of the iron and
will disappear quickly.

OPERATION INSTRUCTION

USING YOUR STEAM IRON

Filling with water

Make sure the iron is turned off and the power cord is unplugged from the electrical
outlet.
1. Set the 'Variable' steam knob to the '0' position before filling the iron with water.
2. Open the 'Water Fill' Opening and fill the Tank up to the 'MAX' Line on the tank.
3. The water level can be observed through the transparent part of the tank, when iron
placed vertically, in case of water level becomes low, refill the tank, following the
procedure described in steps 1 to 3 above.
4. Pour out the remaining water after use.
Note:
Most tap water can be used in this iron. Do not use water additives or substitute water
such as linen or scented water in the steam iron, they can stain fabrics or damage the
iron. Do not fill the water more than the 'MAX' position.

Setting the temperature

Fabric
Synthetics
Silk/Wool
Cotton, linen
Temperature control
∙
∙∙
•••
7
Temperature requirement
Low temperature
Medium temperature
High temperature
EN