Idiomas disponibles
Idiomas disponibles
Silent Wings Technology:
Encompasses a variety of electrical and mechanical optimisations to provide more silent operation,
optimum air flow and very low noise production
Technical advantages
ATX12V version 2.3:
With the Straight Power CM series, be quiet! offers a power supply that corresponds to the latest ATX
12V specifications. It offers 4 separate 12V rails that have an advantageous effect on the dependable
function of the system.
PCI express connectors:
The power supplies from the Straight Power series have up to four 6 or 8 pin connectors that are necessary
for the usage of PCI express graphic cards. In its basic form, every connector is a 6 pole connector that
can be converted into an 8 pole connector by adding two additional pins. (varies by model)
Where possible please always follow the plug numbering to connect to the same graphic card. (VGA 1
to graphic card 1 and VGA 2 to graphic card 2)
20/24 pin mainboard connectors:
With an expandable main connector that features from 20 to 24 pins, the Straight Power series is also
downward compatible with all current specifications. The following standards are supported:
• ATX Specification
• BTX V1.0a
Serial ATA (SATA) connectors:
Power supplies from the Straight Power series are equipped with a sufficient amount of S-ATA
connectors. The plug count ranges from 8 S-ATA electrical connectors for the 480W model to 8 S-ATA
electrical connectors at 680W.
4. COMPATIBILITY
The be quiet! power supplies featured Straight Power series are compatible with current popular power
supplies and mainboard specifications such as:
• Intel ATX12V Power Supply Design Guide Version 2.3 (as well as downwards compatible for
V2.2, V2.01, V 2.0)
• ATX System Design Guide Version 2.2 and Version 2.1
• BTX Version 1.0a
• E-ATX Server Dual Mainboards via 8-Pin Connector
• EPS12V Version 2.92
• Intel C6 Status for the new processor generation
• Energy Star 5 Guidelines
5. INSTALLATION OF YOUR NEW POWER SUPPLY
Please read the point „Warnings and safety notes" before you begin the installation.
To install the power supply in your PC, you will require a screwdriver. Only use the screws delivered with
the adapter because they have the correct thread.
14
