Idiomas disponibles
Idiomas disponibles
8
Place the weight "J" onto the third hose section and
slide＆click it backward or forward to adjust the
buoyancy of the hoses and angle of cleaner in use.
9
Fill the hoses with water to eliminate the air pockets
10
Use enough hose sections to reach the farthest point in the pool.
If your regulator is connected to a vacuum plug, then connect the hose "E" directly
to the regulator"G".If your regulator is connected to a wall skimmer,then pass the
hose through the skimmer mouth and connect it to the regulator via the elbow"F".
11
04
Adjust your filtration system to the vacuum setting.A pump of at
least 1/2 horsepower (3785 L/h) is required.
12
13
14
You can adjust the power of your cleaner by
turning the knob of the regulator "G" as shown
15
If the cleaner leans too far forward or backwards during operations,this can
be corrected by moving the weight "K" along the tube section as shown in the
drawing.
05
Turn on the pump and
relax as your cleaner
cleans your pool.
