Terms And Definitions - Abus TVVR36000 Manual De Instrucciones

Configuration
TAB "DST set-
Setting
tings"
With an activated check box, the de-
Auto DST Ad-
justment vice converts automatically to summer
time.
With an activated check box, an exact
Enable DST
start / end date can be selected
From / To Date of DST start / end
DST Bias Daylight Saving Time Bias: Correc-
tion of the DST to the reference time
TAB "More
Setting
Settings"
Device Name Unique specification of the device
Device Number Used for unique identification when
using CMS software
Never / 1 to 30 minutes – regulates
Auto. log off
how long the menu is shown
Event message Box ticked:
Automatic alarming when notifica-
tions such as motion detection , HDD
full, etc. occur.
Confirm the settings by clicking Apply and leave the
menu with OK.
Network configuration
Correct network settings are essential in the following
cases:

When using remote control of the device and surveil-
lance over your server
Note
Please read the following basic instructions before
setting up the device.
A network is a connection of at least two network-capable
devices.
Transmission types:

Wired networks (e.g. CAT5 cable)

Wireless networks (WLAN)

Other transmission types (Powerline)
All systems have certain similarities, but can also differ in
many ways.

Terms and definitions

An overview of relevant terms when using the device in a
network can be found below.
Parameter Setting
IP address An IP address is the unique address of a
network device within a network.
This address may only appear once with-
in a network. Certain IP address ranges
are reserved for public networks (e.g. the
Internet).
e.g. 10.0.0.0 – 10.255.255.255
Private
address
Subnet mask: 255.0.0.0
range
172.16.0.0 - 172.31.255.255
Subnet mask: 255.255.0.0
192.168.0.0 - 192.168.255.255
Subnet mask: 255.255.255.0
Subnet A subnet mask is a bit mask used for
mask making decisions and assignments dur-
ing routing.
255.255.255.0 is the standard subnet
mask in home networks.
Gateway A gateway is a network device which al-
lows all other network devices to access
the Internet.
This can be the computer connected to
the DSL modem or – usually – the router
or access point within the network.
Parameter Setting
Name The name server is responsible for as-
server signing a unique IP address to a web ad-
dress or URL (e.g. www.google.de). Also
known as DNS (Domain Name Server).
When a domain name is entered into a
browser, the DNS searches for the cor-
responding IP address of the server and
forwards the query on.
The IP of the provider's DNS can be en-
tered here. However, it is often sufficient
to select the IP of the gateway. This then
forwards the queries independently to the
provider DNS.
DHCP The DHCP server automatically assigns
the IP address, subnet mask, gateway
and name server to a network device.
DHCPs are available in current routers.
The DHCP service must be specially set
and activated (see the corresponding
manual for more information).
Note:
When using fixed IP addresses and a
DHCP server, make sure that the fixed IP
addresses are outside the address range
assigned by DHCP. Otherwise, problems
could occur.
88