VENTE-UNIQUE Eco line 600A Instrucciones De Instalación Y Guía De Usuario página 18

1) As Fig.6, slide the end rail into the 1st sleeve, slide the middle rail into the 1st sleeve;
2) As Fig.7, slide the 2nd sleeve to the other end of middle rail, slide the top rail into the 2nd
sleeve;
3) Remove the plastic film on the end rail ,cut the plastic cable tie on the screw rod "A";
4) As Fig.8, pull the screw rod "A" along with inner chain to the end of top rail ;
5) As Fig.9, undo the nut & spring;
6) Tight the nut to the right position as shown in Fig.10,cut the plastic cable tie on sprocket, then
whole rail assembled finished.
ENGLISH
FIG.9
19MM
FIG.10
B
16