Triton Blue Q-BEAM200 Manual De Usuario página 12

Cabeza movil spot led 200w
Ocultar thumbs Ver también para Q-BEAM200:
Idiomas disponibles

Idiomas disponibles

INTRODUCTION
Part of the Q Trion Blue series of LED powered moving heads, Q-SPOT200 is a compact, powerful and feature-
rich spot fixture. Its light source is an efficient 200W LED and LED Ring, with 2 independent gobo wheels, 8
fixed gobos for shaking patten and 7 rotating gobos for index patten, as well as a 4-facet rotating prism and 8
colors and white.
UNPACKING
1 x Moving head Q-SPOT200
1 x Power cable
1 x Omega brackets
1 x User manual
Carefully unwrap the package, check the contents to ensure that all items are present and received in good
condition. If any parts are missing or damaged, contact your supplier immediately and retain the packaging
material for inspection.
SAFETY INSTRUCTIONS
CAUTION! Keep this device away from rain and moisture! Unplug mains lead
before opening the housing!
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe
operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual.
IMPORTANT
• The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorized modification to the device.
• Please consider that damages caused by manual modifications to the device are not subject to
warranty.
• During the operation the housing becomes hot). Allow the fixture to cool approximately 20 minutes
prior to manipulate with it.
• Make sure that the available voltage is not higher than stated on the rear panel.
• WARNING! This unit does not contain an ON/OFF switch. Always disconnect power input cable to
completely remove power from unit when not in use or before cleaning or servicing the fixture.
• Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and
the power-cord from time to time.
• Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle
the power-cord by the plug. Never pull out the plug by tugging the power cord.
• This device falls under protection class I. Therefore, it is essential to connect the yellow /green
conductor to earth.
12.
ENGLISH
User Manual | Q-SPOT200 by Triton Blue | June 2023 | www.triton-blue.com
loading