Idiomas disponibles
Idiomas disponibles
WDMX-TR512 ANTENNA PARTS
• 1 USB type connector
• 2 Status LED: Shows wireless connection
status
• 3 Antenna
• 4 ID Button: Used to set the desired protocol
as transmitter mode or receiver mode
SETUP FOR WIRELESS OPERATION
Each unit is a wireless DMX transceiver. This means that every unit can be configured as a transmitter or receiver. To set up
the system, you first need to assign each receiver to the universe (transmitter) it should work with.
Important details to know before using the WDMX-TR512 (see numbering in the previous image)
Check information on the (ID) button (nº4)
• Status LED (nº2) WHITE: The WDMX-TR512 is in setup mode or disconnected from any transmitter
• Status LED (nº2) BLUE: The WDMX-TR512 is in TRANSMITTER mode and connected to one or more
RECEIVERS
• Status LED (nº2) BLUE blinking fast: The WDMX-TR512 (TRANSMITTER) is connecting to RECEIVERs
• Status LED (nº2) BLUE blinking slow: No DMX signal present on the TRANSMITTER
• Status LED (nº2) GREEN: The unit is in RECEIVER mode and connected to a TRANSMITTER
• Status LED (nº2) GREEN: The unit receives no DMX signal from TRANSMITTER
• Status LED (nº2) RED blinking fast: No signal present
A WDMX-TR512 (RECEIVER) can only connect to a TRANSMITTER while it is completely cisconnected: status LED (nº2) is
WHITE
Setting up the transceiver in transmitter mode
• Keep the (ID) button (nº4) pushed in while powering up the TRANSCEIVER. The status LED (nº2) will
become WHITE color shortly, tham turs BLUE or GREEN (the last selected mode)
• Choose BLUE by pushing the (ID) button (nº4) shortly
• Once BLUE selected, push the (ID) button (nº4) for 3 seconds to confirm the transmitter mode
• The status LED will turn WHITE and after a few seconds turns BLUE (brinking if there is no DMX signal
present)
• The unit is now in transmitter mode
User Manual | WDMX-TR512 by Triton Blue | For Professinal use only, not for residential use
1
2
3
4
7.
