Midea P7 FLEX Instrucciones De Instalación Y Guía Del Usuario página 27

Troubleshooting
Abnormality
3 indicators
flash
Electric floor
brush does not
work
Running time
becomes shorter
Suction loss
Unable to charge
Battery leakage
Possible Cause
- Floor brush or mite
removal brush entangled
during rolling
- Too high or too low use
ambient temperature
- Large trash rolled in
(packaging film, etc.)
- Rolling brush entangled
in hair, etc.
- Battery ages
- Too high or too low use
ambient temperature
- Battery not fully charged
- Excessive dust in dust cup
- Dust cup cotton filter
clogged
- Floor brush or accessory
suction inlets clogged
- Not fully dried after
washing
- Too low or too high
ambient temperature when
charging
- Battery not used for a
long time
Treatment
- Clean floor brush or mite removal
brush
- Please use in a proper environment
- Remove hairs wrapped around rolling
brush
- Remove trash
- Contact the seller or after-sales service
personnel to purchase a new battery
- Use in a proper environment
- Charge the vacuum cleaner
- Clean up trash in time
- Clean cotton filter
- Remove blockage
- Dry the washed parts in a cool place
for use
- Charge the vacuum cleaner in an
environment with proper temperature
(5°C-40°C)
- Replace the battery
27