Cata RENOVA PURE AIR MNV90 GWH Instrucciones Para El Uso página 10

EN
RENOVA TURBO function
This function is a quick start of Booster and Timer, recommended for when you have finished
cooking, or you need to renew the air in the kitchen.
Activate the Booster speed, and it will decrease in speed, 5 minutes of booster, and three mi-
nutes in each of the lower speeds, the motor will stop.
To activate the RENOVA TURBO function:
1. Some speed must be selected.
2. Press the TIMER/RENOVA button for 10 seconds.
3. The display will show
To deactivate the RENOVA TURBO function:
1. Press the TIMER/RENOVA button.
RENOVA AIR function
This function allows you to renew the air in the kitchen periodically. It programmes the cooker
hood to run for ten minutes every hour at minimum speed while 24 hours.
To activate the RENOVA AIR function:
1. Press "+" and "-" simultaneously to enter the configuration mode.
2. Press the "-" key. An "0" will appear.
3. Press the "+" key to select active the function. An "H" will appear.
4. Press the "-" key again to confirm.
5. Press "+" and "-" again simultaneously to exit the configuration mode.
6. Press the Timer/Renova key to activate the RENOVA AIR function.
7. The LED on the Timer/Renova button will flash permanently.
To deactivate the RENOVA AIR function:
1. Press the Timer/Renova key to activate the RENOVA AIR function.
2. The LED on the Timer/Renova button will stop flashing.
3. Press "+" and "-" simultaneously to enter the configuration mode.
4. Press the "-" key. An "H" will appear.
5. Press the "+" key to unselect active the function. An "0" will appear.
6. Press the "-" key again to confirm.
7. Press "+" and "-" again simultaneously to exit the configuration mode.
This function is secondary. It allows you to carry out any operation on the cooker hood. Once the
operation has been completed, the cooker hood returns to the RENOVA AIR function.
10
60822055.22.02.2023.indb 10 60822055.22.02.2023.indb 10
& and alternately.
15/5/23 9:25 15/5/23 9:25