Peach PS500-22 Manual De Instrucciones página 7

GB
IMPORTANT SAFETY INSTRUCTIONS -
KEEP FOR FUTURE USE
The machine is intended for indoor use only. Connect the
machine to an easily accessible socket. To avoid electric
shock, do not use the machine in humid or wet conditions
and never allow water to come into contact with the
machine, the connecting cable or the socket.
Place the machine on a stable surface.
●
Keep the machine away from heat and water sources.
●
Do not use the machine in dusty or explosive
●
environments (flammable gases, vapours, vapours of
organic solvents). Do not use the unit outdoors.
Do not place any objects on the unit.
●
Switch off the machine after each use.
●
Disconnect the power plug when not using the
●
machine for an extended period of time.
Keep the machine away from pets when in use.
●
The power cord must not come into contact with hot
●
surfaces.
If the power cord is damaged, do not use the product.
●
Do not attempt to open or otherwise repair the
●
equipment.
Do not exceed the specified power of the device.
●
Do not allow children to use this equipment.
●
AVOID DANGER OF INJURY!
Operate the shredder only by one person.
●
Never leave the shredder unattended during operation.
●
Keep loose clothing, long hair, jewellery, etc. away
●
from the cutting opening. If an object (sleeve, tie, etc.)
does accidentally get into the pull-in, unplug the main
plug from the socket immediately.
Never insert your fingers into the cutting opening.
●
Keep animals away from the appliance. They may
●
injure themselves.
This appliance may be used by children 8 years of
●
age and older and by persons with reduced physical,
sensory or mental abilities or lack of experience and
knowledge if they have been supervised or instructed
in the safe use of the appliance and understand the
resulting hazards. Do not allow children to play with
the appliance. Cleaning and user maintenance must
not be carried out by children without supervision.
The packaging material is a danger to children.
●
Dispose of the packaging material immediately after
unpacking or keep it out of the reach of children.
Lay the power cord so that nobody can step on it or
●
trip over it.
Operating Instructions PS500-22
Description of the parts
1 Switch (ON-AUTO / OFF / REV / FWD)
2
Power signal lamp (green)
3
Overheat / Overload signal lamp (red / flashing red)
4
Opening for paper
Opening for credit card
5
Wastebasket
6
7
Control window
8 Handle
Assembling
1. Remove the shredder head and waste paper basket
from the packaging.
2. Position the shredder head on the waste paper basket.
Align the shredder exactly with the connecting points and
snap it firmly into place.
Set-up / Commissioning
1
1. Make sure switch is in the "OFF" position.
2. Connect the power cord to a normal 230 volt outlet.
3. During the first applications, any remaining lubricant
may evaporate. If you notice a slight smell of fire or small
clouds of smoke with a new device, you can continue to
work normally. If this still happens after prolonged use,
please contact customer support.
Normal operation
Set the switch 1 to the position "AUTO", the signal
lamp lights green.
2
When inserting paper into the cutting opening
machine starts automatically and stops as soon as all the
paper has passed through.
The cutting capacity is 6 sheets ( 80 g/m
●
card. However, you should only destroy paper or credit
cards one at a time, otherwise the machine may be
overloaded.
Never attempt to shred sealed envelopes. This may
●
cause damage to the cutterbar. Empty the envelopes
and unfold the contents completely before shredding.
Rubberized envelopes, labels or other adhesive
products must NEVER be shredded as this can lead to
4
, the
2
) or 1 credit
3