Idiomas disponibles
Idiomas disponibles
PART:1:
Getting Started
i
'
Resetting the SF.Unit's Memory
2. Slide the battery compartment cover in the direction indicated by the arrow.; 5. Replace the old battery with a new one, making surethat the positive (+) side
of the new battery is facing up (so you can see it).
6. Replace the battery holder and fasten it in-place. .
7. Slide the battery switch td the' "REPLACE: 2, iz setting and repeat steps 4
through 6 for the other batteries...
*
Be sure to replace all three batteries, using C2032 lithium batteries only.
Never mix old batteries with new ones.
| 8. Slide the battery switch to the "NORMAL" setting. |
*.- You will'not be able to turn the unit on if the petiely switch is not.in n the
9. Replace the battery compartment cover.
ae
{
i
'
i
3.
Resetting the SF Unit's Memory. ;
: Warning!
, The following procedure erases all data stored | in the memory of t the. SF. Unit
: Perform the following operation only when you want to delete.all data and
: initialize the settings of the SF Unit.
: Remember -—you should always keep copies of important data by: writing. it down,
rene ittoa bce ceili tasidas or other SF Unit, CSF Unit or NX Unit.
'To reset the SF Unit's memory...
4. Remove the battery holder by stiding it in the diediign indicated by the arrow: 1. Press ON to switch power on. :
in the illustration. i_
_—
7
—_
.
* : 2. Open the battery compartment and press the RESET bution,
Caution
Be sure to remove only one battery at a time. Cierwes you will lose al
data stored in memory.
ee
ee
