GEQUDIO GB-2 Instrucciones De Uso página 21

(A2) Use on GEQUDIO
 Make a call:
Dial a phone number on your phone, then press the headset button on your phone.
 Answering an incoming call
When the headset is connected to the phone and turned on, a ringtone will sound on the headset's speakers
when a call comes in. Press the multi-function button (2) 1x briefly to answer the call.
Please wait for the beep to make sure that the audio connection is complete.
 End call
To end an existing conversation, briefly press the multi-function button (2) 1x.
 Rejecting an incoming call
When the headset is connected to the phone and turned on, a ringtone will sound on the headset's speakers
when a call comes in. Press and hold the multi-function button (2) to reject the call.
 Mute microphone
You can mute the headset by pressing the mute button (6) on the headset headband. Pressing the button again
turns the microphone back on.
(B1) Setup on the mobile phone:
 Put on the headset and adjust it to the shape of your head so that it fits perfectly.
 Move the slider on the headset from the "OFF" position to "ON" to turn on the headset.
 You should now hear the "Power on, pairing" announcement and the LED on the headset will flash red/blue
alternately.
 If you don't hear an announcement, the headset may not be sufficiently charged. In this case, slide the slider on
the headset back to the "OFF" position and charge the headset with the supplied USB cable. The LED lights up
solid red when charging and changes to blue when the headset is fully charged. After the headset is charged,
unplug the charging cable and then repeat steps 1-3.
 Start the Bluetooth search on your mobile phone according to the instructions of the mobile phone
manufacturer.
 Select the "GB-2" headset from the list of available devices.
 When the headset is connected to the mobile phone, the headset says "Paired, your Headset is connected".
21