Idiomas disponibles
Idiomas disponibles
— Remove all packaging materials and keep them for future use.
— Fully uncoil the power cord.
— Clean the appliance with a soft damp cloth and, if necessary, a little mild detergent. Wipe
with a dry soft cloth.
1.
Nozzles
2.
Air outlet
3.
Display
4.
Air inlet
5.
Filter
6.
Filter cover
7.
Cold shot button
WARNING! The surfaces of the appliance are liable to get hot during use and will stay hot
for some time after operation. Only touch the appliance by the handle. Keep
the hot air well away from your eyes or other heat sensitive parts of the body.
WARNING! The air outlet and attachments (nozzles / diffuser) become very
hot during operation. Do not touch!
NOTE: Always ensure the air inlet, air outlet, filter, filter cover and attachments (nozzles /
diffuser) are clean and free of blockage, e. g. lint, hair or other objects.
NOTE: To avoid overheating and ensure performance, check the filter and filter cover for
blockage regularly and clean them accordingly, if necessary.
NOTE: The appliance features an auto-lock function. The air blow setting switch and tem-
perature setting switch will be locked automatically, if they are not pressed after approx.
5 seconds. The indication is shown on the display. Keep pressing the upper part of the
temperature setting switch for approx. 3 seconds to unlock the switches. The indication
goes away.
NOTE: The appliance features a memory function. After the appliance is switched off and
on again, it operates with the same settings of temperature and air flow as previous ope-
ration.
NOTE: If the malfunction occurs (with respective indications on the display), unplug the
appliance immediately from the power supply. Wait a few seconds, connect the appliance
to the power supply and switch it on again. If the malfunction remains, do not use the ap-
pliance, until it has been checked and repaired by a qualified electrician.
• hardware overcurrent: the indication
seconds and then the appliance switches off automatically.
• lack of circuit phase: the indication
seconds and then the appliance switches off automatically.
• motor speed lower than preset speed: the indication
for approx. 5 seconds and then the appliance switches off automatically.
• offset error: the indication
then the appliance switches off automatically.
• high voltage protection activated: the indication
• low voltage protection activated: the indication
• zero-crossing error: the indications
approx. 5 seconds and then the appliance switches off automatically.
PRODUCT OVERVIEW
2
1
7
14
8.
9.
10.
11.
12.
13.
14.
INSTRUCTIONS FOR USE
is flashing on the display for approx. 5 seconds and
3
13
Temperature setting switch
On/off & air blow setting switch
Handle
Hanging loop
Power cord with plug
Cable band
Diffuser
is flashing on the display for approx. 5
is flashing on the display for approx. 5
is flashing on the display
is flashing on the display.
is flashing on the display.
and
are flashing on the display for
4 5
6
8
9
10
11
12
7
