PNI CS101W Manual De Usuario página 8

Now the two switches are synchronized.
To synchronize the third switch repeat step 1 for
the first and third switches.
Cancel synchronization
When the switch is in the off position, press the
touch button for about 5 seconds until the LED
blinks. Take your finger off the button. Press the
same button again for 5 seconds. The LED on
the first switch will stop blinking and will remain
lit blue.
Now the synchronization has been canceled.
Troubleshooting
» The switch is installed and connected
correctly, but the touch button does not work.
First make sure that the wires are connected
correctly and that the bulb is not burned out.
User manual - 8