Installation; Installing/Replacing The Lamp; Danger To Life - EuroLite BS-40 Manual Del Usuario

INSTALLATION

Installing/Replacing the lamp

For the installation, you need one 230 V/300 W GX-6.35 lamp for each device.
During the operation, the lamp reaches temperatures of up to 270° C.
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.

DANGER TO LIFE!

Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
15/35
(7) Power supply
(8) XLR-In socket
(9) XLR-Out socket
(10) Fuseholder
(11) Microphone
(12) Eyelet for safety rope
51806240X84NXS_V_1_1.DOC