Idiomas disponibles
Idiomas disponibles
1.3 - DISPOSAL OF THE PRODUCT
As for the installation operations, even at the end of this product's
life span, the dismantling operations must be carried out by
qualified experts. This product is made up of various types of
materials: some can be recycled while others need to be disposed
of. Find out about the recycling or disposal systems envisaged by
your local regulations for this product category.
Important! – Parts of the product could contain pollutants or
hazardous substances which, if released into the environment,
could cause harmful effects to the environment itself as well as
to human health. As indicated by the symbol opposite, throwing
away this product as domestic waste is strictly forbidden. So
dispose of it as differentiated waste, in accordance with your
local regulations, or return the product to the retailer when you
purchase a new equivalent product.
Important! – the local applicable regulations may envisage heavy
sanctions in the event of illegal disposal of this product.
1.4 - EU DECLARATION OF CONFORMITY
AND DECLARATION OF INCORPORATION OF
PARTLY COMPLETED MACHINE
Declaration in accordance with Directives: 2014/35/UE (LVD);
2014/30/UE (EMC); 2006/42/CE (MD) ANNEX II, PART B
The manufacturer V2 S.p.A., headquarters in Corso Principi di
Piemonte 65, 12035, Racconigi (CN), Italy
Under its sole responsibility hereby declares that:
the partly completed machinery model(s):
ROLLS 700 NG, ROLLS 1200 NG
Description: electromechanical actuator for garage doors
•
is intended to be installed on garage doors to create a
machine according to the provisions of the Directive
2006/42/EC. The machinery must not be put into service
until the final machinery into which it has to be incorporated
has been declared in conformity with the provisions of the
Directive 2006/42/EC (annex II-A).
•
is compliant with the applicable essential safety requirements
of the following Directives:
Machinery Directive 2006/42/EC (annex I, chapter 1)
Low Voltage Directive 2014/35/EU
Electromagnetic Compatibility Directive 2014/30/EU
Directive ROHS3 2015/863/EU
The relevant technical documentation is available at the national
authorities' request after justifiable request to: V2 S.p.A.
Corso Principi di Piemonte 65, 12035, Racconigi (CN), Italy
The person empowered to draw up the declaration and to provide
the technical documentation:
Lauro Buoro
Legal representative of V2 S.p.A.
Racconigi, il 01/10/2022
- 24 - ENGLISH
2 - PRODUCT DESCRIPTION
ROLLS is a gearmotor designed for the automation of sectional
and overhead doors.
ROLLS operates using electric power, in the event of a power
failure from the electrical network, it is possible to release the
gearmotor and move the door manually.
2.1 - TECHNICAL SPECIFICATIONS
Power supply (V - Hz)
Maximum electric power
(W)
Door area (m
2
)
Maximum lifting weight of
the door (Kg)
Start force (N)
Maximum speed (cm/s)
Working temperature (°C)
Duty cycle (cycles / hour)
Protection degree (IP)
Motor weight (Kg)
Protection fuses
ROLLS700
ROLLS1200
230~ - 50/60
230~ - 50/60
120
150
Sectional door
Sectional door
< 12
< 23
Counterweight
Counterweight
balanced door
balanced door
< 10
< 14
70
120
700
1200
17
17
-20 ÷ +55
-20 ÷ +55
90
90
40
40
10
10
10A
10A
3,15A 5 x 20
3,15A 5 x 20
