Idiomas disponibles
Idiomas disponibles
CHANGE THE BLADE
FOR
EN
Blade Replacement
When the moving blade no longer crosses the fixed blade throughout its length, or when the power pruner
could no longer have a clean cut after grinding, blade replacement is recommended with the following steps:
1. For safety, before replacing the blade, please ensure the pruning shear is power OFF and power cable
disconnected from the battery.
2. Refer to the diagrams below on the procedure to replace the blade.
3. Clean up the the blade after replacing, connect to power cable to battery, power ON to test the blade, close
up the blade to complete the whole procedure.
Fixed and movable blades can be replaced individually; do not worry about the size of the replacement
blade aperture, the opening will automatically return to normal size during power ON after completing blade
replacement.
CLEANING AND DISINFECTING THE CUTTING HEAD
The cutting head can be cleaned to remove any residue (sap, etc.).
To do this, we recommend using the KOHAM ecological spray can reference. It is also possible to disinfect
the cutting head to prevent any diseases spreading on the wood. To do this, we recommend avoiding the use
of corrosive products that could damage the device. Don't hesitate to contact us so that we can assist you in
selecting your products.
36
INSTRUCTIONS
all these operations you must disconnect the pruning shears.
