Fracarro FRPRO 10 Instrucciones De Funcionamiento página 44

REMOTE POWER
SETTINGS
Only for
FRPRO10S
The remote power supply can be enabled individually for the three inputs UHF1, UHF2 and UHF3.
From the "REMOTE POWER SUPPLY - 12V/24V" menu, select the voltage you want (12V or 24V DC); this
setting is valid for all the UHF inputs; therefore, it is not possible to set the remote power supply at 12V in
one input and at 24V in another input.
The maximum supplied power at 12V is 200mA, at 24V maximum 100mA.
The activation of the UHFx input remote power supply will be signaled by the switching the red LED on next
to the UHFx input.
In the FRPRO10S model, the SAT input can also be power supplied remotely; the remote power supply will
be used to select the polarization you want by means of a LNB (converter) with universal outputs. The set-
tings are as follows: OFF, 14V/0kHz, 14V/22kHz, 18V/0kHz, 18V/22kHz (max 250mA @ 14V).
5.6 REMOTE POWER SUPPLY MENU
TELE. 12V/
REMOTE POWER
24V 12V
TELE. 12V/24V
TELE. 12V/24V
24V
REMOTE POWER UHF1 12V
TELE. UHF1 24V
OFF
UHF1 12V
24V
ON
UHF2 12V
REMOTE POWER
24V
TELE. UHF2
OFF
UHF2 12V
24V
ON
UHF3 12V
REMOTE POWER
24V
TELE. UHF3
OFF
UHF3 12V
24V
ON
REMOTE POWER SAT LNB
SAT LNB OFF
SAT LNB
18V / 22kHz
44
Setting the remote power
Warning 12V
supply voltage at 12V or 24V
YES=V / NO=X
To select
Warning 24V
YES=V / NO=X
To select Enabling the remote power
supply of the UHF1 input
To select
Enabling the remote power
supply of the UHF2 input
To select
Enabling the remote power
supply of the UHF3 input
Setting and selecting the satellite
polarity of the SAT input
To select
OFF
14V/0kHz
14V/22kHz
18V/0kHz
18V/22kHz
FR
Min
•
•
Usi
cha
will
rati
Use
Not
To
unit
the
Afte
New
The
FM Reg
adju