Craftsman 917.377631 Manual Del Usuario página 4

Idiomas disponibles

Idiomas disponibles

Theseaccessories wereavailable whenthislawnmowerwasproduced.They ar_so
available at mostSearsretailoutletsandservicecenters.MostSears
stores can also oerc_
repair partsfor you, when you providethe model number of your lawn mower. Some of these
accessories may not apply to your lawn mower.
LAWN MOWER PERFORMANCE
CUPPING DEFLECTOR
FOR REAR DISCHARGE LAWN MOWERS
GRASS CATCHERS
FOR
REAR DISCHARGE
LAWN MOWERS
MULCHER
KITS
GRASS CATCHERS
FOR
"
SIDE DISCHARGE
LAWN MOWERS
+-
STABlUZER
GAS CANS
LAWN MOWER MAINTENANCE
MUFFLERS
AIR FILTERS
BELTS
BLADES
BLADE ADAPTERS
WHEELS
+
SPARK PLUGS
ENGINE OIL
Read these instructions and this manual in
its entirety before you attempt to assemble
or operate your new lawn mower. Your
new lawn mower has been assembled at
the factory with the exception of those
parts left unassembled for s_ipping
purposes. To ensure safe and proper
operation of your lawn mower, all parts
and hardware you assemble must be
tightened securely. Use the correct tools
as necessary to ensure proper tightness.
All parts such as nuts, washers, bolts, etc.,
necessary to complete the assembly have
been placed in the parts bag.
TO REMOVE
LAWN MOWER
FROM
CARTON
• Remove loose parts included with
mower.
• Cut down two end corners of carton and
lay end panel down flat.
• Remove all packing materials except
padding between upper and lower
handle and padding holding operator
presence control bar to upper handle.
Roll lawn mower out of carton and check
carton thoroughly for additional loose
pads.
HOW TO SET UP YOUR LAWN
MOWER
......... - . ....
TO UNFOLD HANDLE
IMPORTANT:
Unfold handle carefully so
as not to pinch or damage control cables.
• Raise lower handle section to operating
position and squeeze the bottom ends of
lower handle towards each other until
the pin in handle can be inserted into
one of the three height adjustment
holes.
• Remove protective padding, raise upper
handle section into place on lower
handle and tighten both handle knobs.
• Remove any packing material from
around control bar.
• Your handles may be adjusted for your
mowing comfort. Refer to Service and
Adjustments section of this manual.
4
loading