Idiomas disponibles
Idiomas disponibles
w)
Charge the device when the battery voltage drops to 15 %. During charging, the device should be
turned off.
x)
After each uplift, press the „OFF" button twice in order to achieve the maximum magnetic force.
ATTENTION! Despite the safe design of the device and its protective features, and despite the use
of additional elements protecting the operator, there is still a slight risk of accident or injury when
using the device. Stay alert and use common sense when using the device.
3. Use guidelines
The device is intended for lifting, positioning, and moving metal objects.
The user is liable for any damage resulting from unintended use of the device.
3.1.
Device description
3.2.
Device use
1．Use method:
turn on the electricity of magnet (Power), then bring the magnet fully contact
with steel, press the green "On" button and begin the lift/carry process, press the red "off" button
twice quickly to turn off the magnet. Remember to turn off the electricity when you put it aside.
(Green light On, the magnet is magnetized, Red light On, the magnet is demagnetized.)
2．Always test the connection before attempting to use it to ensure that it is capable of holding
the material securely.
3．Numerous factors can negatively affect the strength of the magnetic force, like dirt, debris,
oils and grease, painted surfaces and any gap between the magnets and the metal surface will
decrease the magnetic force. Ensure that the metal is clean and free of these factors.
4．Thicker metals will be held more strongly than thinner metals.
5．If the workpiece is flat and clean low-carbon steel with a thickness greater than 5mm can
EN
1 – Power
2 – Red OFF button
3 – Green ON button
4 – Charging port
5 – Magnet
6 – Display
