Idiomas disponibles
Idiomas disponibles
When the buds are fully charged, the battery lasts for about 10 hours of music playback (depending
on volume, Bluetooth connection and other factors). The charging box capacity is sufficient to supply
the buds with around 2.5 charges, resulting in a total playback time of approx. 35 hours without a
power source.
Bluetooth connection
When using the buds for the first time, they must be paired with the playback device. As soon as the
buds are removed from the charging box, Bluetooth pairing mode is activated. For details on pairing,
please refer to the operating instructions of the playback device. With each subsequent use, the buds
automatically pair with the previously connected device. If you wish to pair with another device, ensu-
re the previous connection is disconnected as the buds can only be connected to one device at a time.
Active Noise Cancelling (ANC) / transparency mode
This product features Active Noise Cancelling (ANC) and transparency mode. ANC reduces back-
ground noise. The installed microphones pick up the ambient noise, processors in the earphones then
analyse the noise and measure what type of counter sound is required to neutralise it.
Transparency mode allows you to let ambient noise through while listening to music or other audio
content. Ambient noise is recorded by the microphones and reproduced in the earphones, for exam-
ple to be able to listen to loudspeaker announcements even though music is being played.
See the „Touch sensor" section for details of how to enable or disable ANC or transparency mode.
Music and gaming modes
You can switch between music mode and gaming mode during playback. Game mode has a lower
latency than music mode. While music mode is somewhat mellower in terms of sound. See the „Touch
sensor" section for details of how to switch between the two modes.
Hands-free function
You can use the earphones as a speakerphone with your paired device. If the paired device supports
this function, you can answer, reject, and end calls. See the „Touch sensor" section for further infor-
mation on operation.
Voice assistant
If your paired device has a voice assistant, this can be activated using the earphones. See the „Touch
sensor" section for details of how to use this function.
EN - Page 5 of 9
