Courtyard Creations RUS487M Instrucciones De Armado página 6

Step 11:
Hook the suspension spring (#13) into the
top of both swing arm tubes (#11). Repeat the
same procedure for both sides. See Fig. E.
Step 12:
Hang the other side of the suspension spring
(#13) into the hole located in the angled brace
of the top cross beam w/adjustable teeth (#1).
Repeat the same procedure for both sides.
See Fig. F.
Warning:
Make sure that both ends of the suspension
springs (#13) go completely through the
holes in the angled braces of the top cross
beam w/adjustable teeth (#1) and the swing
arm tubes (#11).
Step 13:
Slide the canopy/frame connectors (#30) onto
the canopy (#35). Fasten them together by
using screws (#27). Make sure that the teeth
of the canopy/frame connectors are facing
towards the inside of the frame.
See Fig. G – Step 1 and Step 2.
V-3
Fig. E
Fig. F
Step 1
Step 2
Fig. G
DO NOT RETURN TO THE STORE!
STOP
PAGE 6 OF 8
13
11
11
13
1
13
13
35
35
13
13
11
11
13
13
30
27
27