jedi LIGHTING Integra W50 iDUAL Instrucciones página 7

Remote control RGB colors
White color
ON/OFF
W
1
4
15 kinds
existing colors
5 ranks brightness
adjusting
The working distance of the remote control to the lighting unit is from 3 to 5m
depending on the environment of the installation.
Service
How to change a battery
1 2
Instructions of remote control RGB Colors
Important information! Keep these instructions for future use
768 kinds colors
gradually circularly change
2 3
(automatic)
5
In automatic color changing
mode synchronization
between several luminaries
is not possible
3
4
CR2025
Operation
Press once to switch the product ON,
Press again to switch it OFF.
Switch iDUAL system to white.
W
Press the button to start the automatic color change mode.
The color changes gradually among a specific
pre-programmed color cycle.
Program 1 – Red / Purple/ Red
1 2 3
Program 2 – Purple/ Blue/ Green/ Yellow/ Green/
5
4
Program 3 – Blue/ Green/ Blue
Program 4 – Red/ Yellow/ Red
Program 5 – Green/ Yellow/ Green
Press once for main,get one of the six colors,then press
the opposite button in the same column to change the
color step by step.Each column contains 5 colors.
Brightness adjustment(Work only for fixed color mode).
Separate collection for battery
Blue/ Purple
EN
5