VOLTOMAT HEATING CYKB20-7 Manual página 38

pool.
16. Do not use the fan heater in rooms with explosive gas or while using inflammable solvents,
varnish or glue.
17. Store in a cool dry place when not in use.
18. Do not hold the appliance under running water or other liquids.
19. Do not insert or pull out the plug with wet hands as this may cause electrical shock.
20. The appliance should not be operated by means of an external timer-switch or by means of a
separate system with remote control not originally belonging to this appliance.
21. This product is for household use only.
22. This heating device is not suitable for assembling in vehicles and machines.
means "DO NOT COVER".
23.
Read and Save These Instructions
INSTALLATION
1) Unpack the Castor Wheels and U-shape Bolt from the product packaging.
2) Turn the radiator upside-down on a scratch-free and stable surface to prevent damage to the
paint finish or your floor surfacing.
3) Fit the castor assemblies onto the radiator by placing the U-shaped bolts between the
outermost fins on each side of the radiator (see Fig. A).
4) Securely fasten the castor assemblies onto the radiator by screwing two wing nuts onto the
bolts (see Fig. B).
5) Turn the radiator in upright position after finished the castor assembly. For the correct upright
position, please refer to fig. C.
OPERATION
1) Select an indoor location for the heater away from electrical cords, drapes and other furnishings.
DO NOT place heater directly beneath an electrical outlet or against paper board or low density
fiberboard.
2) Turn power selector to O and the thermostat to MIN before plugging in the radiator.
37