cecotec PUMBA 1600 PURRFECT MEAL Manual De Instrucciones página 33

- Close the cover by pressing down. Fig.9
2. Operates with AC adapter and 3 "D" size batteries as optional power supply. If you prefer
not to use the power adapter, you can install 3 new "D" size alkaline batteries in the base.
NOTE
- Batteries and power adapter not included.
- Make sure that the on/off switch is in the "I" position and that the positive and negative
marks on the batteries match.
3. Set up the feeder according to the instructions below.
4. OPERATION
Fig. 10
Quick Setup Guide
1. Manual mode
Hold down the button for 3 seconds. If the tray rotates one compartment, it means that
the feeder is working properly. You can also use this function to feed your pet manually.
2. Current time setting
Press and hold the
time.
3. Schedule "Meal 1"
- Press and hold the
- Schedule "Meal 1" time
- Press and hold the
the time in which
- On= dispense "Meal 1".
- Off= do not dispense "Meal 1".
4. Schedule "Meals 2, 3 and 4"
- Use the first example to configure "meal 1".
- Unlike, in this case, you will have to press the
meals.
- Please note that the setting cycle is a maximum of 24 hours.
5. Voice recording and playback
Recording
Press and hold the
message. You can say "Bobby, let's eat" into the microphone. When you have recorded the
message release the button.
Cancel recording
Press and hold the
anything.
Playback recording
Press and hold the
NOTE:
button and press the
button and press the
button and press, at the same time, the
"meal 1" will be served.
button until the digital display flashes and, next, record a voice
button until the digital display flashes and release without saying
button until the digital display flashes to play back the voice recording.
buttons at the same time to set the current
button at the same time.
, and buttons to set the different
PUMBA 1600 PURRFECT MEAL
ENGLISH
and buttons to set
33