Idiomas disponibles
Idiomas disponibles
WARNING
Electrical
Shock Or Personal
Injury
Hazard
Disconnect
electrical
supply before
performing
maintenance
to the unit.
Failure to do so could result in
electrical
shock or personal
Injury
from the vacuum
cleaner
suddenly
starting.
TO REMOVE LIGHT BULB
1. Disconnect
power cord from electrical
outlet.
Flat
Screwdriver
Headlight
Lens
2. Press han-
dle release
pedal and lay
vacuum clean-
er back.
3. Pry light
lens out at
slots as shown
on both sides.
Rotate lens up
and lift off.
CAUTION
Do not use a bulb rated over 9W (13V).
During extended
use, heat from the
bulb could overheat surrounding
plas-
tic parts.
4. Remove the light
bulb by pulling
straight out.
5. To replace the
light bulb carefully
insert fully into slot.
Note: See PARTS AND FEATURES for
bulb number.
CAUTION
Do not plug in or turn on until the vacu-
um cleaner is completely
reassembled.
6. To replace
light
lens, place tab at
front of lens into
slot. Rotate lens
down and firmly
snap into place.
18
