Fitting; Fitting With Strap; Fitting With Tripod/Tree Mount - Zeiss Secacam 7 Instrucciones De Uso

10. Fitting

10.1 Fitting with strap

Use the enclosed mounting strap to attach the ZEISS Secacam to a tree, a solid branch or a pole. To do this,
guide the retaining strap through the eyelets on the back of the housing. Hold the camera in the intended
position and tighten the loose end of the mounting strap until the camera is securely fastened. Make sure to
hide the remaining part of the strap.
To release the mounting strap, press the clip and pull out the strap end.
1 2

10.2 Fitting with tripod/tree mount

The ZEISS Secacams has a threaded bushing on the top and bottom for a ¼-inch tripod socket (diameter:
6.35 mm, length: 6 mm), which you will find on almost all commercially available camera tripods. This allows
you to attach the camera on a variety of tripods, wall mounts or tree mounts available from accessory stores.
Tripod socket
1/4"
Bottom
Top
External power supply
Battery compartment
(optional)
Tip: The best height to position a trail camera is around waist high and slightly pointed downwards.
40