Idiomas disponibles
Idiomas disponibles
Connecting to Power
1. Plug the included USB-C cable into the USB port located on the back of the
mount cradle.
2. Connect the USB-C cable to your vehicle's USB-C port or auxiliary power
outlet via a 20W adapter. (Power adapter not included.)
Note: If connecting directly to your vehicle's USB-C port, charging speeds
may be affected. For the fastest charge, we recommend connecting to the
auxiliary power outlet via a 20W adapter.
10
EN
Using the Auto Sense Mechanism
Once it is unplugged or the car is turned off, the Auto Sense's
internal battery keeps a charge for up to one hour.
Mounting and Charging
1. Hold the phone in front of the
mount cradle to activate the
automatic clamping arms.
Releasing Device
Release buttons are located on either
side of the mount cradle. To release
your phone simply press one or both
buttons and the arms will open. The
release buttons can also be used to
open the mount arms.
• Note: The Auto Sense is powered via a USB-C cable and coil cell battery.
There is no on/off switch. Once it is plugged in, the device will remain on
unless the vehicle is turned off.
2. Place the phone inside the mount.
The arms will close automatically
after one second and wireless
charging will begin.
11
