Bosch NITP666SUC Manual De Uso Y Cuidado página 19

Indicator Malfunction Solution
c /,-__ The electronic system has overheated
and the corresponding burner has
been turned off.
I--'4 The electronic system has overheated
and all burners have been turned off.
" ' Incorrect supply voltage, outside nor-
U I
mal operating limits.
Lac / La__
The burner has overheated and has
turned off in order to protect its cook-
ing surface.
* If the warning persists call the Technical Assistance Service.
Do not rest hot pans on the control panel.
Wait until the electronic system has cooled down completely.
Then touch any symbol on the cooktop.*
Please contact your electricity distributor.
Wait until the electronic system has cooled down sufficiently
before turning it back on.
Normal operating noises of the cooktop
Induction technology is based on the creation of
electromagnetic fields. They may generate heat directly
on the bottom of the cookware. Pots and pans may
cause a variety of noises or vibrations depending on the
way they've been manufactured. These noises are
described as follows:
Low humming (like a transformer)
This noise is produced when cooking at a high heat
level. It is based on the amount of energy transferred
from the cooktop to the cookware. The noise ceases or
quiets down when the heat level is reduced.
Quiet whistling
This noise is produced when the cooking vessel is
empty, tt ceases once water or food is placed in the
vessel.
Crackling
This noise occurs with cookware comprised of various
materials layered one upon the other. It's caused by the
vibrations of the surfaces where different materials meet.
The noise occurs on the cookware and can vary
depending on the amount and method of preparation of
the food.
Loud whistling
This noise occurs with cookware comprised of different
materials layered one upon the other, and when they are
additionally used at maximum output and also on two
cooking zones. The noise ceases or quiets down when
the heat level is reduced.
Fan noises
For proper operation of the electronic system, it is
necessary to regulate the temperature of the cooktop.
For this purpose, the cooktop is equipped with a cooling
fan, which is activated to reduce and regulate the
temperature of the electronic system. The fan may also
continue to run after the appliance is turned off if the
detected temperature of the cooktop is still too hot after
turning it off.
The noises described are a normal element of the
described induction technology and shouldn't be
regarded as defects.
Technical service
Contact our Technical Service Department if your
appliance needs repair. Our central Customer Service
Center (see below) will also be happy to supply you with
details on a center close to you.
E number and FD number:
When you contact our service, please have the Model(E)
number and the FD number for your appliance available.
You can find the identification plate with these numbers
on the underside of the appliance and in the appliance
booklet.
Questions? Please contact us. We look forward to
hearing from you!
800-944-2904
www.bosch-home.com
1901 Main Street, Suite 600
Irvine, CA 92614
19