Idiomas disponibles
Idiomas disponibles
CLEANING
DUST BIN
1. Remove the dust
bin.
2. Slide the lever in
the direction
of the
arrow
to remove
the embedded
dust.
3. Push the filter
release button,
open the
dust bin.
Filter
Release
Button
Filter
4. Take out the cleaning
brush (included)
to
clean the dust filter.
5. Push the dust filter
cover release latch to
pull out dust filter
cover.
DustFilter
Cover Release
Latch
DoUSt_llter
6. Wash
all
parts of the
/III1\
dust bin.
_
Z Allow filter to dry 24 hours before
putting back into vacuum cleaner.
NOTE: When the cleaning of the filter no
longer restores vacuum cleaner suction to
full power, replace the filter.
DO NOT operate without filter installed.
DO NOT wash in the dishwasher.
DO NOT install damp.
CAUTION
Do not
attempt
to dry
with
a hair
dryer
or by
placing
in clothes
dryer.
Hot air may cause the filters
to warp.
It is not necessary
to wash
after
each
use.
Dust Filter
Cover
8. Install the dust
filter
cover along
the inside of
locating
strip, and
make sure you
hear a "click."
9. Close the dust
bin and reattach
it as shown.
14
