Idiomas disponibles
Idiomas disponibles
e: shoulder strap padding
f: crotch strap padding
g: adjustment strap
h: base
i: seat rotation button
l: leg structure button
m: support leg
n: basculating adjustment handle
o: isofix connectors
p: leg adjustment button
q: belt access door
r: car belt router
s: kinetic pods
USE FOR CHILDREN 40 TO 105 cm
IN HEIGHT
How to install the car seat
1 Check the location of Isofix connectors and Isofix or I-Size
logos on the seats in your vehicle.
2 Install this car seat only on seats facing the normal
direction of travel. If the vehicle has rotating or
repositionable seats, position the seat so it faces the
direction of travel.
3 Rotate the support foot (1) and extract the attachment
body until it clicks (2). The position indicator turns green.
4 Extend the base's Isofix connectors: press the security
levers (1) and buttons (2), pulling the connectors
outwards, all the way (3). The connectors are blocked and
ready for connection.
5 Place the car seat on the vehicle seat, attach it to the
isofix connectors and push until possible.
IMPORTANT: the two indicators on the side of the base
will turn from red to green to show that it has been
connected correctly.
IMPORTANT: after completing the operation, try moving
the base to verify that both Isofix connectors have been
connected correctly.
6 Adjust the height of the support foot by pressing the
button behind the leg, until it touches the car floor.
IMPORTANT: the two indicators on the support foot
will turn from red to green to show that it has been
connected correctly.
IMPORTANT: make sure that the leg is in a vertical
position and the foot is resting on the vehicle floor, even
if the base is slight raised from the seat.
IMPORTANT: if there is a storage compartment in the
floor of your vehicle in the area where the support foot is
resting, open the compartment lid and rest the foot on
the base of the compartment.
Functions of the car seat
7 The car seat has a swivel seat: to rotate the seat, press the
button as shown in the figure (1) and, at the same time,
rotate the seat (2).
IMPORTANT: use rear-facing for children between 40 and
105 cm in height. The position indicator is green.
8 When the child is between 76 and 105 cm in height, the
seat can be used in forward facing position. The position
indicator is green.
IMPORTANT: do not use in this position if the child is less
than 15 months old.
9 To place the child in the seat more easily, press the
button and rotate the seat by 90°; the indicator near the
button will turn red.
IMPORTANT: do not use the car seat in this position
when the car is moving.
10 To adjust the car seat's reclining angle, press the handle
under the cat seat. The seat can be adjusted in 5 positions
(both forward and rear facing).
11 The headrest must be adjusted to match the child's
height as the child grows. There are several positions. To
switch from a low to a higher position: pull the lever in
the upper central part of the head rest (1) upwards and,
at the same time, lift the headrest (2).
To switch from a high position to a lower one: pull the
20
12
13
14
15
16
17
18
19
20
