Idiomas disponibles
Idiomas disponibles
CAUTION:
DO NOT let familiarity with your sander make you
careless. Remember that a careless fraction of a second is sufficient
to cause severe injury.
_1
L_ WARNING:
ALWAYSwser safety goggles
or safety glasses with side shield and a full face
shield when operating your sander. Failure to do so
could result in foreign objects being thrown into your
eyes, resulting in possible serious injury.If the sanding
operation is dusty, also wear a face or dust mask.
Electrical Connection
Yoursander has a precision-builtelectricmotor and it shouldonly be connected
to a 120-volt, 60-Hz. power supply (normal household current). DO NOT
operate on direct current (DC). This large voltagedrop willcause a lossof power
that will overheat the motor. If your sander does not operate when plugged into
an outlet, have a professionalelectrician check the power supply.
Z_ WARNING:
Your sander should NEVER be connected to the
power source when you are assembling parts, making adjustments,
installing or removing sandpaper, cleaning or when it is not in use.
Disconnecting
the sander will prevent accidental starting, that could
cause serious personal injury.
J Z_ CAUTION:
DO NOT use this sander near water.
I
2 INTERCHANGEABLE BASES (See Figs. 2, 3, 4)
This sander (Fig. 2) has 2 interchangeable bases for extraversatility. T he large
triangularbase (Fig. 3) is for sanding larger surfaces. The detail finger base
(Fig. 4) is ideal for sending corners and small, intricate hard-to-reachareas.
Fig. 3
Triangular Base
g.4
Detail Finger Base _
10
