Idiomas disponibles
Idiomas disponibles
English
VPAR-RGBL -
7 - Setting setting
VPAR-70RGBL, VPAR-120RGBL and VPAR-150RGBL projectors are configured using the remote RDM control box VRDM-CONTROL. This box makes it
possible to deport the control part of the projector in order to make all the adjustments (settings) of the projector via the DMX cord by RDM protocol.
The menu is different depending on the type of projector, the functions are as follows:
VRDM-CONTROL
MENU
RDM
Products List
Page 24
IP66 architectural projectors with 7/12/18 RGBL LEDs 70 / 120 / 150 W
Label:
''Product Name''
Model:
''Product Name''
Manufacturer:
Hitmusic SAS
Firmware:
V1.00
DMX Address:
001 (XXX)
DMX Personality:
CH list
DMX Slots:
ON (By default)
Identify:
OFF
Temperature:
...
NO DMX
Slave mode
Stand-Alone Mode
Edit USER Macro
Fixture Menu
Setting Mode
The name of the product connected to the box
The name of the product connected to the box
The name of the manufacturer
Firmware version
DMX address 001 start (XXX) end
Number of used channels
Allows you to flash the selected projector in order to
identify it among the other projectors
Internal temperature of the projector
Blackout
Freeze
(By default)
Stand-Alone
Single
Master
Slave (By default)
Master Dimmer
Values from 000 to 255
Flash
Values from 000 to 255
Red
Green
Custom color
Blue
Lime
Presets/Macro
Macro
Fade Speed
USER macro
Play Time
Time 00-99
Play Fade
Fade 00-99
Edit Step NB
Step NB 01-20
Edit Step 1 to 20
Red
Edit Steps
Green
Blue
Lime
Linear
Exponential (By default)
Dimmer curves
Logarithmic
S-Curve
Red
Green
White Balance
Blue
Lime
900Hz
1200Hz (By default)
PWM Frequency
2400Hz
3600Hz
°C (By default)
Temperature
°F
Time info
...
OFF
DFSET
ON
