Idiomas disponibles
Idiomas disponibles
SP6553
EngSpa
Manual
68192
7/8/04
9:2_M
Page
i0
Replacement
and Care of Filters
(continued)__
c. Install new filters in the filter housing
track with the glue beads of the wick-
ing pad to the inside of the filter hous-
ing.
d. Return
the top cover
of the filter
housing by installing the cover over
r_,
the fixed tabs on the rear of the lower
filter housing and pivoting the cover
down over the top of the filters. Snap
the cover over the two spring tabs.
e. Replace the filter housing in the cab-
inet. Note: There is a front and back
orientation.
To position
the
filter
housings correctly:
Front of
Humidifier
" Be sure that the spring tabs of filter
housings are towards front of cabi-
net.
, Align the lower portion of the filter
assembly over the six ribs located at
the bottom rear of the humidifier cab-
inet.
f. Position fan assembly onto the cabi-
net. Make sure the fan venturi (low-
est cylinder section below the fan) is
placed inside the filter housing.
g. Replace water bottles.
h. Close the pivoting lid.
Spring
i. The unit is ready for use or to be
Tabs
stored away for next season.
Spring
Tabs
FixedTabs
Filter
_g
Rear of
Humidifier
Top
Cover
Flat Portion
of FHter Housing
Towards
Bask of Cabinet
Spring
Tabs Towards
Front of Cabinet
Step 4 e.
10
