GE AEW10 Manual Del Propietario E Instrucciones De Instalación página 12

Installation Instructions
I-KI SECURE THE CASE IN THE
WINDOW AND INSTALL THE
FOAM TOP WINDOW GASKET
_] Attach the window locking brackets (one
on each side) with Type C screws.
[]
[]
Cut the foam top window gasket to the
window width.
Stuff the foam between the glass and the
window to prevent air and insects from
getting into the room.
[] INSTALL THE AIR CONDITIONER
IN THE CASE
[]
Slide the air conditioner into the case by
the base pan. Do not push on the controls,
styrofoam air discharge housing or the
finned coils. Make sure the air conditioner
is firmly seated.
Do not press on
these areas--
damage to the
unit may result
Base Pan
12
INSTALL THE AIR CONDITIONER
IN THE CASE (CONT.)
r_ Replace the 2 screws removed earlier,
one on each side of the case.
[]
Attach the front grille to the case by
inserting the tabs on the grille into the
slots on the front top of the case. Push
the grille in.
oc:3©
[]
Secure the front grille to the case by
replacing the 2 screws removed earlier.
Press on the top of the grille to help
with side screw installation.
['_ Connect power.