Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL FOR SYNC RGB PRODUCTS
NHL Model No. 73014LO / 73017LO / 73018LO / 73062LO
1. Technical Specification and Install Instructions
A.
The Sync RGB product has been equipped with its corresponding power supply and
controller. To reduce the risk of fire and electric shock, use only the power supply and
controller that was provided with this product.
If decorating with multiple Sync RGB products, please follow the installation instructions
B.
in order to achieve the best effect of intelligent synchronization.
The effective control distance of Sync RGB products is 10 meters, which refers to the
C.
distance between the remote control to the in-line controller, or two in-line controllers,
in a straight line without obstacles. Multiple sets of products within the effective
control distance can be automatically connected to achieve large-scale/long-distance
synchronization (The recommended amount of maximum connected sets is 10 sets).
Due to different conditions in actual operation and the variable application environments,
D.
the synchronizing signal may be delayed. When two adjacent sets are connected, the
first synchronization time takes 3~5 seconds.
2. Install Recommendation
A.
Sync RGB products should not be installed in places with high humidity, such as drains,
swimming pools, or in water accumulating areas.
The control distance is within 10 meters of the visual range, and the in-line controller is
B.
required to be installed at 0.5 meters above the ground, or overhead 0.2 meters from the
ceiling. (as shown in Figure 1).
C.
Visible straight-line distance is required between the controllers (as shown in Figure 2 /
Figure 3)
Multiple sets of Sync RGB products are automatically synchronized as long as the
D.
product is in an effective signal source area (as shown in Figure 4).
Ceiling
in-line
controller
> 0.5 meter
Within 10 meters visual range
360° to control signals receive.
Floor
01/12/2023
> 0.2 meter
> 0.2 meter
in-line
controller
Figure 1
Visible straight-line distance
in-line
controller
A
In-line controllers can be connected as network
automatically. As shown, controller C can receive
controller A signals through controller B。
in-line
controller
in-line
controller
Visible straight-line distance is required between the in-line controllers
in-line
in-line
controller
controller
A
in-line
in-line
controller
controller
in-line
controller
in-line
controller
In-line controllers within Range A can receive signals
directly from remote control; and effect to Range B in-line
controllers as network synchronization。
in-line
controller
B
in-line
C
controller
Figure 2
in-line
controller
in-line
controller
Figure 3
in-line
controller
B
in-line
controller
in-line
controller
in-line
controller
Figure 4
PRINTED IN CHINA
