Lifegoods LG544 Manual De Instrucciones página 13

Operating instructions
Set up
1.
Place the product in the middle of where you want
to place it. Remove the product from the carrying
case and place the product upright. Make sure
that the supports are not fixed before moving the
3.
At the same time, each push the leg up with one
hand and hold the top of the leg with the other
hand to adjust the leg in height. A push button will
click the leg into place. Repeat this process for the
remaining legs.
5.
For each person, attach an extension of the leg to
the existing legs to extend the leg. Then lift the legs
up until the push button falls into the right hole.
Repeat this process for the remaining legs.
product.
2.
Grab two opposite legs, lift the frame slightly off the
ground and take small steps backwards. Be careful
not to unfold the product too quickly, this may cause
the legs to bend.
4.
Put the cloth over the frame. Fasten the Velcro at the
bottom of the cloth to the supports of the frame.
6.
Place the legs of the product firmly on the ground.
13