Bosch SHI Instrucciones De Instalación página 16

Base and Toe Panem/Final _nstructions
BASE AND TOE PANEL (Continued)
Figure 31
SHY66 & SHX99A Modets Base and "Foe Pane1 installa-
tion
1) PUacethe Base PaM under and up the front bottom paneU
of the dishwasher, as shown in Figure 31,
2) Insert the Base Part screws (Figure 1, UetterO) into the
Base Part, as shown in Figure 31, UetterB, Tighten the
Base Part Screws,
3) PUace the Cotton UnsuUation Strip (Figure 1, UetterC)
under the unit, between the bottom of the Base Part and
the floor, as shown in Figure 31, UetterC,
4) PUacethe toe paneUover the Cotton Insulation Strip, and
use the toe panel screws (Figure 1, letter N) to secure the
toe panel in place, as shown in Figure 31, letter D,
FINAL mNSTRUCTmONS
1) Energize the dishwasher power supply circuit,
2) Consult the Dishwasher Use and Care Manual, and run
the dishwasher through one complete cycle,
If the dishwasher does not operate properly, refer to the
Self-Help section of the Use and Care Manual, If the
dishwasher still does not operate properly, refer to the
Customer Service Section of the Use and Care Manual,
15