Ultenic H8 Manual Del Usuario página 8

Function & Operation
Mist Output Speed
Touch mist output symbol "
symbol " ", AUTO mode is exited. Touch again humidifier will work in middle speed with display
showing " ". Touch again goes into the highest speed with display showing "
to turn to AUTO mode.
Night Mode
Long press mist output symbol "
all background light will become dim. After about 10 seconds, the symbol "
background lights and bottom atmosphere light will be off. Touch any button to wake up the display.
Long press this symbol 2 seconds again to switch off the NIGHT mode.
Constant Humidity
Touch the symbol HUMIDITY "
1
the humidity range from 30%RH to 75%.
Touch once, it will increase by 5%RH for each time. When it reaches 75%RH, touch again, it will
2
show "Co" and flash for 3 seconds to exit humidity setting function and back to AUTO mode.
After setting the desired humidity, humidifier will keep the memory and confirm after 3 seconds.
3
LED display will change to show the current humidity. It means setting is finished. Every minute
display shows setting humidity and CONSTANT HUMIDITY symbol will be flickering as well.
Humidifier will adjust mist output speed according to current humidity, so mist output speed is
4
uncontrollable under this function.
If the setting humidity is 1%~9% higher than current humidity, humidifier will work in the lowest
5
speed.
If the setting humidity is 10%~15% higher than current humidity, humidifier will work in the
6
middle speed.
If the setting humidity is 15% higher than current humidity, humidifier will work in the highest
7
speed.
But if the setting humidity is lower than current humidity, humidifier will stop working. If current
8
humidity drop down to lower than setting humidity, humidifier will rework again.
Long pressing the symbol HUMIDITY "
9
back to AUTO mode.
Timer Setting
There are 12 timer setting: 1,2,3,4,5,6,7,8,9,10,11,12 hours. Touch the symbol TIMER "
a
LED display will show the desired setting timer. Touch till "Co" displaying on the LED, timer
setting is canceled.
The timer shows the rest operation time and decreases by 1 hours, i.e., if the timer is setting at
b
12 hours, display shows 11 after one hour.
Long pressing TIMER button to cancel TIMER function.
c
Degerming
Symbol DEGERMING "
, warm mist will come out after 10~15 minutes. Second touch to start plasma function, display shows
symbol PLASMA " ", plasma generator works as well. Third touch to shut down heating function.
Fourth touch to shut down plasma function.
", humidifier will work in the lowest speed with display showing
" about 2 seconds, display show the NIGHT mode symbol "
", display shows CONSTANT HUMIDITY symbol, you may select
" 2 seconds to cancel constant humidity function and
", first touch to start heating function, display shows symbol HEATING"
". Touch again
",
" is on and all other
", the
"