Vlectro VL-LEDPANBL2000 Manual Del Propietário página 3

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
WARNING: Do not use this heater in small rooms when they are occupied by persons
not capable of leaving the room on their own, unless constant supervision is provided.
WARNING: To reduce the risk of fire, keep textiles, curtain, or any other flammable
material a minimum distance of 1m from the air outlet.
The heater needs to be installed so that the switches and other controls cannot be
touched by a person in the bath or shower.
INSTALLATION
FOOT ASSEMBLY
Before using the heater, the feet must be fitted to the unit.
These are to be attached to the base of the heater using the screws provided.
WALL MOUNTING
Please note that the product must be installed at least 15cm from the floor and 50cm
from the ceiling.
Install the bracket with the provided screws.
Drill the holes in the wall on each side, then insert the plastic expanded plugs and fix
the bracket in the wall with the screws provided.
Place the heater in a suitable position and ensure that the holes are aligned with the
bracket.
Tighten the screws on top of the bracket.
3
EN
loading

Productos relacionados para Vlectro VL-LEDPANBL2000

Este manual también es adecuado para:

Vl-ledpanwh2000