Handling Precautions - Panasonic AG-MC200G Instrucciones De Funcionamiento

Features
The AG-MC200G is a super-directional electret microphone
developed for camera recorders and other professional
applications.
This unit delivers far superior results compared with a regular
unidirectional microphone: It excels in terms of sound quality, and
when sound from the sides or from behind the microphone is to be
blocked out, as when picking up the sounds at sports venues, for
instance.
The AG-MC200G has a stabilized power supply circuit built into the
grip and uses a DC 48 V capacitor microphone phantom power
supply.

Handling precautions

Electret capacitor microphones are easily damaged by high
temperatures and humidity. Therefore, take care not to expose the
microphone to water or to leave the microphone for extended
periods of time near strong lights, exposed to direct sunlight during
the summer, or in vehicles with the windows rolled up, etc.
Be sure to use an output cable with balaced connections.
Unbalanced cables (cables wihch short Pin 2 or 3 to Pin 1) cannot
be used.
OSee the operating instructions of the camera recorder for a
description of mounting methods.
Specifications
Power supply: Phantom power supply, 48 V DC
Current consumption: 2.0 mA (typical)
indicates safety information.
Type:
Back electret capacitor type microphone
Frequency response:
160 Hz to 20 kHz
Sensitivity:
–40 dB ±3.5 dB (0 dB = 1 V/Pa, at 1 kHz)
Maximum input sound pressure level:
127 dB S.P.L. (at 1 kHz, 1% distortion)
S/N ratio (1 kHz/Pa):
69 dB or more
Output impedance:
100 Ω ±30% (at 1 kHz)
Output connector:
XLR (3 pins)
Dimensions (diameter a overall length):
21 mma162 mm (
Weight:
Approx. 108 g (0.24 lb) (excluding wind shield)
OFrequency response and polar patterns: See page 3.
Weight and dimensions when shown are approxlmately.
Speclilcailons are subject to change without notice.
7 1
/ incha6-7 /
8 16
inches)
E-2