Idiomas disponibles
Idiomas disponibles
4. Remove the start battery positive (+) terminal from your start battery.
Connect the other battery positive cable into the existing battery terminal
from your start battery. Reconnect the existing battery terminal to your
start battery positive (+) terminal.
4
6. Mount the SBI Unit (7)
Mount in a convenient location, as shown in
diagram 7. REDARC recommends connecting the
SBI as close as possible to the start battery.
NOTE: Nuts, bolts and mounting plate not
provided. Refer to the SBI manual for further
mounting instructions.
7. Attach the Earth Wire (8)
Connect the SBI ground wire to the chassis
earth (8). Ensure a good connection is made and
any paint has been removed from the mounting
location.
8. Connect the ground terminal of the auxiliary
battery to chassis earth, using the auxiliary battery
ground cable and the other battery terminal
provided as per diagrams 9 and 10.
9. Wire the SBI12 as shown in diagrams 11, 12 and 13. Ensure that all
connections are tight and that the provided spring washers are used.
11
5. Insert the crimped ends of the battery positive cables into the isolator
terminal protectors provided as per diagrams 4, 5 and 6.
5
9
10. Reconnect Main Battery Earth.
12
6
7
10
13
8
EN English | 3
