Emos P5531 Manual Del Usuario página 5

Setting the Socket's LED Indication
The Smart socket's LED indication can be set to 4 modes.
These are:
1. LED indicates ON/OFF – If the socket is on -> the LED indicator is on. If the socket is off -> the LED indicator is off.
2. LED indicates ON/OFF in reverse – If the socket is on -> the LED indicator is off. If the socket is off -> the LED indicator is on. 3. LED indicator off – The indicator is off regardless of whether the socket is on or off.
4. LED indicator on – The indicator is on regardless of whether the socket is on or off.
These modes can be set in the socket's Settings tab. The tab can be found in EMOS GoSmart at the bottom of the socket's
home page (see Fig. 16).
Safety Warnings
• Do not interfere with the structure of the socket.
• Do not use the socket if damaged.
• Do not interconnect two or more sockets.
• Use the socket only in a dry, electrically safe environment.
• Do not exceed the socket's maximum permitted load.
• Incorrect use may cause risk of fire or injury by electric current.
• Pay attention to the data on the type of label of the appliances connected to the device. Maximum input power of con-
nected electrical appliances must not exceed 3,680 W (max. current 16 A). Max. inductive load: 2.5 A.
• This appliance is not intended for use by persons (including children) whose physical, sensory or mental disability or lack
of experience and expertise prevents safe use, unless they are supervised or instructed in the use of the appliance by
a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• Any use of the device not listed in the previous sections of the manual will result in damage to the product and could
present danger in the form of a short circuit, injury by electric current, etc. The device must not be modified or otherwise
restructured! Safety warnings must be followed unconditionally.
Hereby, EMOS spol. s r. o. declares that the radio equipment type P5531 is in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the following internet address: http://www.emos.eu/download.
Do not dispose with domestic waste. Use special collection points for sorted waste. Contact local authorities for in-
formation about collection points. If the electronic devices would be disposed on landfill, dangerous substances may
reach groundwater and subsequently food chain, where it could affect human health.
DE | Smart Steckdose
Produktbeschreibung (siehe Abb. 1)
1. Steckdose
2. ON/OFF-Schalter/Paarungstaste
Technische Parameter
Spannung: 250 V~/50 Hz
Maximale Belastung: 16 (2,5) A, ∑ 3 680 W
Frequenz Wi-Fi: 2,4 GHz
Wi-Fi-Standard: IEEE 802.11 b/g/n
Sicherheitsmechanismen: OPEN/WEP/WPA-PSK/WPA2-PSK
Steuerung: Wi-Fi, Bluetooth
Funktion
Möglichkeit der manuellen oder automatischen Steuerung
Timer-Funktion
Countdown-Funktion
Zirkulationsfunktion Zufallsmodus-Funktion
Funktion der zeitverzögerten Abschaltung
Funktion Sonnenaufgang/Sonnenuntergang
Verbrauchsmessgerät
Zustandsanzeige des Steckers
Verknüpfung der Steckdose mit dem Mobiltelefon
1. Um Ihre Smart Steckdose mit Ihrem Mobiltelefon zu verbinden, benötigen Sie die EMOS GoSmart App, die Sie von Ihrem
Google play (Android) oder App Store (iOS) herunterladen können (siehe Abb.2).
2. Die Steckdose unterstützt nur 2,4-GHz WiFi („5-GHz" wird nicht unterstützt) (siehe Abbildung 3).
3. Öffnen Sie die App EMOS GoSmart und bestätigen Sie die Datenschutzbestimmungen und klicken Sie auf „Ich stimme
zu" (siehe Abb. 4).
4. Registrieren Sie sich, um auf die EMOS GoSmart App zugreifen zu können. Falls Sie bereits ein Konto für die App haben,
melden Sie sich mit Ihrer E-Mail und Ihrem Passwort an (siehe Abb. 5 und 6).
5