illy CAPPUCCINATORE Manual De Uso página 6

EN
user warnIngs
location
The perfect location to install the appliance is a non-slip and flat surface.
electrical connection
1. Make sure that the main power supply corresponds to the technical
specifications of the appliance.
2. Connect the power cord to a correctly installed earthed socket.
turning on/off the device
• The device turns on when connected to the power supply.
• Turn on the device using the function buttons.
• The device will stop automatically. The turn-off time varies according to
the jug content and the selected function (about 4 minutes).
• If you wish to interrupt the process earlier, press the previously selected
function button again or remove the jug from the base.
note:
When removing the jug from the base after operation, the buttons flash;
when replacing the jug on the base, the buttons stop flashing.
Buttons' functions
Froth or cold shaking
Hot milk or hot chocolate
Frothed milk
assembling / removing the accessories for Mixing
The accessories for mixing can be found under the base.
• Choose the accessory and insert it on the axis at the jug base.
• Pull the accessory upwards to remove it.
note:
The accessories for mixing can be disassembled easier by previously
removing the jug from the base.
capacity
The jug can contain from 150 to 250 ml. Refer to the scale on the jug.
8
Frothed milk
warnIng:
Pay attention to the MAX capacity notch, otherwise the milk will spill.
• Use milk with a fat content equal to 3,5% and fill the carafe up to 225
ml to obtain better results.
• You cannot get the same amount of froth using milk with a fat content
equal to 1,5%, soya milk or lactose-free milk.
Hot chocolate
warnIng:
• Do not fill past the MAX notch, otherwise the beverage will spill.
• Add cocoa powder after milk, otherwise the accessory for mixing will clog.
• Do not pour more than 200 grams of chocolate powder. If this volume
is reached, the machines makes a sound meaning it has overworked. It
can be restarted by pressing the button again.
use
Select the accessory for mixing and the function button according to the
following table.
use desired
accessory
result for mixing
Frothed milk A
Hot milk B
or hot chocolate
Cold frothed
A or B
or shaken liquids
1. Install the accessory for mixing
2. Pour the liquid into the jug
3. Place the lid
4. Press a function button
5. Wait for the automatic turning off or press the previously selected
function button again to interrupt
6. If you wish to turn off the milk frother, unplug the socket.
EN
Button
9